China began to introduce and produce FRP gratings in the early 1990s. With development, FRP gratings are gradually recognized and accepted, and are used in more and more occasions, such as tree grates for municipal greening tree pits, ground drainage covers for car washes, trench covers, photovoltaic maintenance channels, etc. Depending on the occasion of use, the specifications and models are also different. In addition, there are many kinds of colors and surface types. The following editor summarizes some common specifications and sizes of FRP gratings.

The commonly used size of the whole plate of FRP grating is: 1×4.04mm   1.22×2.44mm   ; 1.22×3.66mm

[FRP grating commonly used aperture] Mesh size: 12×12mm 19×19mm 38×38mm 50 ×50mm  8×8mm  83×83mm

[Common thickness of FRP grating] Thickness: 13mm  25mm  30mm  38mm  40mm  50mm  60mm  

[Common colors of FRP grille]: green, yellow, gray, blue, red, gray, Black, white, etc.

The above is an introduction to the common specifications and sizes of FRP, which need to be cut before being put into use. Install.